How to Reset a Tripped Circuit Breaker Safely

By Jimmy Hall · Texas homeowner, not a contractor · Last reviewed September 2026 · How we research

Before You Touch the Panel

Before you reset anything, turn off or unplug the lights and devices in whatever room lost power. A tripped breaker usually means the circuit got overloaded or something shorted, and resetting it with everything still switched on can trip it again immediately, or in rare cases cause a spark at the panel.

How to Reset a Tripped Breaker: Quick Overview

If you’re wondering how to reset a tripped breaker safely, the key is to unplug or switch off whatever was running in that room first, then flip the breaker firmly to OFF before pushing it back to ON. If the same breaker keeps tripping, or if it’s a GFCI outlet doing the tripping instead of the panel, see our guide to GFCI outlets that keep tripping. A panel that trips repeatedly across multiple circuits can also be a sign it’s time to look at our electrical panel upgrade cost guide.

Step-by-Step Reset

Find your electrical panel and open the cover. Some homes, especially older ones, have a second sub-panel in a garage or utility closet, so check there too if the main panel looks normal. Scan the row of switches for one that’s flipped to off, or sitting in a middle position between on and off, that’s your tripped breaker. Move that breaker firmly to the full off position first, then switch it back to on. You should feel it click into place. Go back and turn your lights and devices on one at a time rather than all at once, so you’re not immediately overloading the circuit again.

When It’s More Than a Simple Reset

A single trip after running too many things on one circuit, like a space heater and a hair dryer, is normal and not a red flag on its own. Call a licensed electrician if the same breaker trips repeatedly, if you smell burning or see scorch marks near the panel, if a switch feels hot to the touch, or if the breaker won’t stay reset at all. Those can point to a short circuit, damaged wiring, or a breaker that’s failing and needs replacing.

A Safety Note

Resetting a breaker itself is safe and something almost anyone can do. Where it stops being a DIY job is the panel itself. Never open, touch wiring inside, or attempt repairs on your electrical panel beyond flipping the breaker switch. If your panel is older, especially in homes built before the 1980s, or if breakers trip often, it’s worth having an electrician take a look.